REMOVING THE OPTICS LOCKING SCREW
Before using the scanner for the first time, remove the optics
locking screw on the bottom panel of the scanner with a flat-
head screwdriver. As the removed locking screw is necessary
when transporting the scanner, tighten the screw at the
storage position for a future use.
TRANSPORTING THE SCANNER
When transporting the scanner, move the optics to the locking
position to prevent a damage and then tighten the optics
locking screw on the bottom panel of the scanner.
1. When the DiMAGE Scan Multi PRO Utility
Software is in function:
Windows:
Press Ctrl, Shift and L key simultaneously.
Macintosh:
Press Command
, Shift and L key
simultaneously.
2. When "The optics will be moved to the
locked position." appears on the screen,
click on [OK].
3. "The optics have been moved. Turn the
scanner off and lock the locking pin."
appears on the screen, click on [OK].
• Turn off the power of the scanner and tighten
the optics locking screw.
14