Table of Contents
Advertisement
SCAN SETTINGS
4. Enter the desired input/output resolution from
the input and the output resolution drop-down
list.
• Values can also be entered into the output resolution list
box directly.
Input Resolution list box
The value with "#" is the default setting.
< When selecting 35 mm or Multi Format 35mm >
4800/2400/1600/#1200/800/600/480
(When inputting value directly, the desired value from
300 to 4800 is available.)
< When selecting 6x4.5, 6x6, 6x7, 6x8, 6x9 or Multi
Format 6x9 >
4800/3200/2400/1600/1200/#800/600/400/320
(When inputting value directly, the desired value from
200 to 4800 is available.)
Output Resolution list box
The value with "#" is the default setting.
2400/1440/1200/800/720/600/400/360/350/#300/240/
200/180/150/96/72/36
(When inputting value directly, the desired value from
36 to 2400 is available.)
• When "pixel" is selected in the Unit list box, the output
resolution cannot be selected or specified.
5. The dimensions of the cropping frame are
displayed in the input size text boxes.
• Values can be entered directly or by resizing the
cropping frame.
• The values will change if a different unit of measure is
selected.
• The scanning area size can't be changed if the Input
Size is locked.
6. Enter the desired output size (maximum 3
digits).
• The output size is limited by the maximum resolution
of the scanner.
• The values will change if a different unit of measure is
selected.
• The output size cannot be changed when the unit list
box is set to pixels.
• The scanning area size can be changed
proportionally (within the resolution limits) when the
Output Size is locked.
7. The input scan resolution text box is set to
the lowest input (scan) resolution necessary
to achieve the desired output size and resolution.
Input scan resolutions can also be selected from the drop
down list or entered directly.
94
Advertisement
Table of Contents
