Digital Roc - Minolta DiMAGE Scan Multi PROAF-5000 Instruction Manual

DIGITAL ROC

The Digital ROC (Reconstruction Of Color) function is an image correct function that can
restore the color quality of a faded image.
If the color of the film has faded with the passage of time, the changed color can be corrected
automatically by reconstructing color when scanning so that a digital image with an appropriate
color can be restored.
1. Click on in the Main window.
• The Digital ROC function is turned on. When the
preview scan and final scan (see page 98) are
performed, the color quality of a faded image is restored
and the corrected image is displayed.
• When scanning a B&W film, the Digital ROC function is
not available.
• When scanning a color film when 16 bit linear is
selected as the scanning mode in the Preferences, the
Digital ROC function cannot be used.
• When the Digital ROC function is turned on, the settings
of "Auto Expose for Slides" in the Preferences, the color
matching, the AE Lock function when prescanning (see
page 56) or the AE Area Lock function (see page 57)
are cancelled.
• When using the Digital ROC function, be sure and
perform the prescan and adjust the focus with the Point
AF or Manual Focus function (see pages 60 to 61)
before the final scan. Putting a checkmark on "Auto
Focus at Scan" in the Preferences is recommended.
• To turn off the Digital ROC function, click on the Digital
ROC button again.
• The Digital ROC function may not always operate
effectively depending on the conditions of the film or the
faded color.
• Much more time is required for scanning when the
Digital ROC function is turned on, compared with when
that function is turned off.
• You can use the Digital ROC function for the following
types of B&W film only after the film has been
developed in color and scanned with the "Color
Negative" setting for the film type. We cannot assure this
procedure for other types of film.
Kodak Select Black & White 400
Kodak T400CN
Illford XP2 Super
88