Table of Contents
Advertisement
UTILITY SOFTWARE
With the Prescan image displayed in the Prescan tab...
1. Click on
in the Main window.
• Your system's standard save dialog box will appear.
2. Enter the desired file name and select the file
destination.
3. Select the file type from the drop-down
list.
• With Macintosh, a PICT file which width is more
than 4096-pixel cannot be selected.
4. Click on
.
• The final scan will begin.
• When scanning is complete, the scan will be
saved in the selected location. The software will
return to the Prescan tab.
5. Close the Control Window to exit the
DiMAGE Scan Multi PRO driver software.
• The driver window will close automatically after
each scan if the Close Driver After Scanning
option was selected in the Preferences dialog
box (see page 29).
FINAL SCAN
DiMAGE Scan Multi PRO
99
Advertisement
Table of Contents
