Removing The Optics Locking Screw - Minolta DiMAGE Scan Multi PRO AF-5000 Instruction Manual

REMOVING THE OPTICS LOCKING SCREW

Before using the scanner for the first time, remove the optics
locking screw on the bottom panel of the scanner with a flat-
head screwdriver. As the removed locking screw is necessary
when transporting the scanner, insert it into the storage
posistion, for future use.
TRANSPORTING THE SCANNER
When transporting the scanner, move the optics to the locking
position to prevent damage and then tighten the optics locking
screw on the bottom panel of the scanner.
1. When the DiMAGE Scan Multi PRO Utility
Software is in operation:
Windows:
Press Ctrl, Shift and L key simultaneously.
Macintosh:
Press Command , Shift and L key
simultaneously.
2. When "The optics will be moved to the
locked position." appears on the screen,
click on [OK].
3. "The optics have been moved. Turn the
scanner off and lock the locking pin."
appears on the screen, click on [OK].
• Turn off the power of the scanner and tighten
the optics locking screw.
14