Correcting The Histogram - Minolta DiMAGE Scan Multi PROAF-5000 Instruction Manual

CORRECTING THE HISTOGRAM

The input slide bar has the Input shadow slider, Input gamma
slider and Input Highlight slider. The output slide bar has the
Output Highlight slider and Output shadow slider.
The image can be corrected by dragging the slider or inputting
the value in the text box.
The change will reflect the prescan image.
1. Drag the slider to move it to the desired level or
input the value in the text box.
• The change will be reflected in the prescan
image.
* For example, if you use the input Highlight slider and input
shadow slider to remove areas which contain no pixels (flat
line at left or right) the original color will be better
represented.
Although the output slider does not normally need to be
adjusted, use it according to the characteristics of the
output equipment. For example, use the output slider when
the black part is not printed clearly with the 0 setting in the black
level. (In this case, adjust the Output level by moving the Output
Shadow slider to the right slightly while checking the correction
result).
Displaying the Histogram of Each R, G, B color
1. Click on .
• When is clicked again, the
histogram of each R, G, B channel
disappears.
2. By dragging the Input Highlight
slider (right) or the Input
Shadow slider (left) in each R,
G, B channel or inputting the
value directly in each text box,
the Histogram RGB can be
corrected.
• The change will be reflected in the
prescan image displayed in the
Image Correction display area.
• The change corrected in each R, G, B channel will be
also reflected in each corresponding tone curve.
TONE CURVES AND HISTOGRAM
Input Level Histogram
DiMAGE Scan Multi PRO
69