Table of Contents
Advertisement
USING THE IEEE 1394 INTERFACE
Only support driver of Windows
This scanner has been packaged with the IEEE 1394 cable. For details, refer to the page 106.
With Macintosh made by Apple Computer, Inc., the IEEE1394 Interface is named "FireWire".
Therefore, interface names of other related surrounding equipment may also be called "FireWire".
Before connecting the IEEE1394 Interface unit to a personal computer, install
the driver software of the DiMAGE Scan Multi PRO (see pages 20 and 23).
1. Turn the SCSI terminator
switch (Dip switch 4) to OFF.
2.
Connect one end of the IEEE
1394 cable to either IEEE 1394
port on the back of the scanner.
3.
Connect the other end of the IEEE 1394 cable to the
IEEE 1394 port on the computer or the IEEE 1394 Hub
terminal.
Example:
Connect the IEEE 1394 Hub terminal
®
2000, Windows
®
Me and Macintosh OS.
* The maximum number of equipment
you can connect to this terminal is 63.
However, if you use a daisy chain it is
16.
DiMAGE Scan Multi PRO
19
Advertisement
Table of Contents
