User Hrc Programs - Landice Executive Owner's Manual

A User HRC Program looks and runs exactly the same as a Built-In Program. The primary difference between Built-In Programs
and User HRC Programs is customization. Unlike the Built-In Programs, User HRC Programs allows you to manually edit
individual segments.
To Edit a User HRC Program:
If you are content with your changes, press START to begin the User HRC Program. Your newly modified User HRC Program
will be permanently stored in Executive Treadmill's memory even if the treadmill is unplugged.

User HRC Programs

Press Home • Programs • HRC PROGRAMS • USER
HRC PROGRAM
After selecting the User program you want to edit,
press EDIT to enter EDIT MODE.
In this screen, you can adjust the program's maximum
speed and change elevation. To adjust the length of
your program and target heart rate, press the EDIT
PROFILE button.
From this screen, you will see a detailed view of the 1st
segment of the User HRC Program.
Using the numeric keypad, you can modify the 1st
segment's time and target heart rate.
Press NEXT SEGMENT to view the 2
detail.
To view other segments, use the designated "NEXT/
PREVIOUS SEGMENT" keys to navigate through the
entire 20 segment program.
If you want to shorten the program to less than 20
segments, press END HERE at your desired last segment.
You can always add more segments in the future by
going to the last segment and pressing ADD SEGMENT.
nd segment in
18