Using Numeric Key Pad - Landice Executive Owner's Manual

The Executive Treadmill has an on-screen number pad that will appear every time a
numeric value needs to be entered, which serves multiple functions to make the treadmill
easier to control. It can be used to enter user settings and configure programs.
Whenever you are prompted with a numeric entry, the numeric keypad will appear. If
there are multiple numeric prompts displayed at once, the active numeric entry will be the
non-frosted prompt. The numeric keypad will only modify the line that is non-frosted.
To activate another line, either press the "ENTER" button or simply press on it and it will
defrost.
GO KEYS
The "GO" keys next to the SPEED and GRADE buttons allow you to instantly go to a target speed or elevation without having
to hold down the Speed/Grade "+/-" keys. "To use "GO" function, press the "GO" button next to Speed (if you want to change
you speed) or next to the Grade (if you want to change your grade) and then choose the desired value. After selecting the
desired value, you will have 3 seconds to cancel your selection. You may skip the countdown and go directly to your desired
speed or elevation by pressing "GO" on the touch screen.
PROGRAM CONFIGURATION
In program setup you will be asked different information based on that particular program's parameters. This information
will be entered using the numeric keypad.
• In the 5 Built-In Programs, the keypad can be used to enter the program's maximum time, speed, and elevation.
• The Interval program also asks for the minimum speed and elevation.
• In the Specific Goal Programs, the keypad can be used to enter a variety of different information.
• Time Goal: time
• Distance Goal: distance
• Calorie Goal: calories
• In the 5 User Programs, the keypad can be used to set the speed, elevation and time for each individual segment.
This will be explained in more detail under the USER PROGRAM section of this manual.
• In the Heart Rate Control (HRC) Programs, the keypad can be used to enter the program's maximum speed, maxi-
mum elevation, target heart rate, and program time.
• In the User Heart Rate Control Programs, the keypad can be used to enter the program's maximum speed, maxi-
mum elevation, program time, and the target heart rate for each individual segment. This will be explained in more
detail under the Heart Rate sections of this manual.
• In the fitness tests/protocols, the keypad can be used to enter your age.
Using the Numeric Keypad
12