System Settings - Landice Executive Owner's Manual

To alter the units of the machine, press the "UNITS" button. The units will switch between Miles & Miles per Hour and Kilometers
& Kilometers per Hour.
This screen also displays the total miles and hours that the treadmill has been used.
Press the "SAVE" button to return to the system menu.
25

System Settings

You can enter the system settings at any time from the
Menu Screen by pressing the "SETTINGS" button.
In the Setup Screen, you have access to 4 alterable settings:
• Brightness
• Units
• Date
• Diagnostics
To alter the brightness, simply press the "BRIGHTNESS"
button. The bar will fill to the right, representing an increase
in screen brightness. If the "BRIGHTNESS" button is
pressed after the screen reaches maximum brightness,
the brightness level will drop to its lowest setting.
To alter the time and date, press the "SET DATE/TIME"
button. This will direct you to another screen where you
may change the date and time.
In the Time Setup Screen, use any of the necessary
designated keys to correctly set the time and date.
Once set, the Executive Treadmill will maintain the current
time and date even when you turn it off.
Unplugging the treadmill, however, will deactivate the
internal clock/calendar. Next time you reconnect your
treadmill, your clock and calendar will reset back to the
time and date before you unplugged it.