User Programs - Edit Mode - Landice Executive Owner's Manual

The Executive Treadmill comes equipped with Auto Program. It is a unique feature that allows you to write a User Program
as you workout. All manual changes to speed and grade including the time of those changes will be stored as the new User
Program.
Note: Running Auto Program will erase the existing User Program and write a new one from scratch.
To run Auto Program:
User Programs – Auto Program
Press Home Programs • User Programs • Select User Program • Edit
You will be prompted with the option to EDIT or AUTO
PROGRAM.
Select AUTO PROGRAM to begin Auto Program.
As soon as you begin Auto Program, you'll notice that it reads
NEW SEGMENT. This is an indication that you are creating a new
segment, the 1st segment, in this case. During the first 10 seconds,
you can adjust the speed and grade setting for this segment.
After 10 seconds, the segments settings will lock in and the banner
will change to AUTO PROGRAM. This is an indication that any
future speed or grade changes will trigger the creation of a new
segment.
You can create up to 20 segments each up to 99 minutes long.
Whenever you want to create a new segment, just change the speed
and/or grade to the desired settings. The NEW SEGMENT banner
will indicate that you are creating a new segment.
To finish the Auto Program press the "Finish Program" button at
any time. The User Program will now be saved exactly as you ran it
during Auto Program.
16