Configuring Face Detection - HIKVISION Network Camera User Manual

Steps:
1. Enter the Scene Change Detection settings interface:
Configuration> Advanced Configuration> Smart Event> Scene Change
Detection
2. Check the checkbox of Enable Scene Change Detection to enable the function.
3. Click-and-drag the slider to set the detection sensitivity. The sensitivity value
ranges from 1 to 100, and the higher the value is, the more easily the change of
scene can trigger the alarm.
4. Click the Edit button to set the arming schedule.
5. Select the linkage methods for scene change, including Notify Surveillance
Center, Send Email, Upload to FTP, Trigger Channel and Trigger Alarm Output.
6. Click Save to save the settings.
Figure 6-60 Configuring Scene Change Detection

6.6.10 Configuring Face Detection

Purpose:
Face detection function detects the face appears in the surveillance scene, and some
certain actions can be taken when the alarm is triggered.
Note: Face detection function varies according to different camera models.
User Manual of Network Camera
91