Display Information On Stream; Configuring Target Cropping - HIKVISION Network Camera User Manual

6.4.4 Display Information on Stream

Check the checkbox of Enable Dual-VCA, and the information of the objects (e.g.
human, vehicle, etc.) will be marked in the video stream. And then you can set rules
on the connected rear-end device to detect the events including line crossing, intrusion,
etc.

6.4.5 Configuring Target Cropping

Purpose:
You can specify a target area on the live video, and then it can be displayed via the
third stream in some certain resolution, thus providing more details of the target area
if needed.
Note: Target cropping function varies according to different camera models.
Steps:
1. Enter the Target Cropping settings interface:
Configuration> Advanced Configuration> Video/Audio> Target Cropping.
2. Check the checkbox of Enable Target Cropping to enable the function.
3. Set Third Stream as the stream type.
4. Select the cropping resolution for the video display of target area. A red rectangle
is displayed on the live video to mark the target area, and you can click-and-drag
the rectangle to locate the target area as desired.
5. Click Save to save the settings. You can go to the Live View page and click the
Third Stream tab to view the video of the target area.
User Manual of Network Camera
Figure 6-32 Display Info. on Stream
64