Appendix; Appendix 1 Sadp Software Introduction - HIKVISION Network Camera User Manual

Appendix 1 SADP Software Introduction

 Description of SADP V 2.0
SADP (Search Active Devices Protocol) is a user-friendly and installation-free online
device search tool. It searches the active online devices within your subnet and
displays the information of the devices. You can also modify the basic network
information of the devices using this software.
 Search active devices online
 Search online devices automatically
After launch the SADP software, it automatically searches the online devices
every 15 seconds from the subnet where your computer locates. It displays the
total number and information of the searched devices in the Online Devices
interface. Device information including the device type, IP address, port number,
gateway, etc. will be displayed.
Note: Device can be searched and displayed in the list in 15 seconds after it went
online; it will be removed from the list in 45 seconds after it went offline.
 Search online devices manually
You can also click Refresh to refresh the online device list manually. The newly
User Manual of Network Camera

Appendix

Figure A.1.1 Search Online Devices
159