Configuring Time Settings - HIKVISION Network Camera User Manual

6.2 Configuring Time Settings

Purpose:
You can follow the instructions in this section to configure the time synchronization
and DST settings.
Steps:
1. Enter the Time Settings interface:
Configuration > Basic Configuration > System > Time Settings
Or Configuration > Advanced Configuration > System > Time Settings
 Select the Time Zone.
Select the Time Zone of your location from the drop-down menu.
 Synchronizing Time by NTP Server.
(1) Check the checkbox to enable the NTP function.
(2) Configure the following settings:
Server Address: IP address of NTP server.
NTP Port: Port of NTP server.
Interval: The time interval between the two synchronizing actions with NTP
server.
User Manual of Network Camera
Figure 6-2 Time Settings
37