Configuring Parking Detection - HIKVISION Network Camera User Manual

Figure 6-68 Configuring Fast Moving Detection

6.6.18 Configuring Parking Detection

Purpose:
Parking detection function detects illegal parking in places such as highway, one-way
street, etc., and a series of actions can be taken when the alarm is triggered.
Note: Parking detection function varies according to different camera models.
Steps:
1. Enter the Parking Detection settings interface:
Configuration> Advanced Configuration> Smart Event> Parking Detection
2. Check the checkbox of Enable Parking Detection to enable the function.
3. Select the region from the drop-down list for detection settings.
4. Click the Draw Area button to start the region drawing.
5. Click on the live video to specify the four vertexes of the detection region, and
right click to complete drawing.
6. Set the time threshold and detection sensitivity for parking detection.
Threshold: Range [5s-20s], the threshold for the time of the vehicle parking in
the region. If you set the value as 10, alarm is triggered after the vehicle stay in
the region for 10s.
User Manual of Network Camera
104