Setting The General Parameters - Huawei RP Series Install Manual

HUAWEI RP100&RP200 V100R001C04B010
Upgrade Guide

7.2 Setting the General Parameters

Choose System Settings > General and set the parameters according to Table 7-1, Table 7-2,
and Table 7-3.
Figure 7-3 Time and Time zone
Table 7-1 Time and time zone settings
Parameter
Location
Time zone
Time format
Date format
Enable NTP
FTP server
address
System time
Issue 01 (2013-06-18)
Value
France
(GTM+08:00) Beijing,
Chongqing
24-hour
YYYY/MM/DD
Disable
172.19.1.63
2013/5/2 0:32:0
Huawei Confidential.
7 System Settings
Remarks
Set the value based on the actual
condition.
Set the value based on the actual
condition.
Set it based on the actual condition.
Recommended value.
Set it based on the actual condition.
This parameter is available when
NTP is enabled. Set it based on the
actual condition.
Set it based on the actual condition.
82