Starting And Stopping Your Pc Workstation; Starting Your Pc Workstation - HP Kayak XU User Manual

NOTE
1 Setting Up and Using Your PC Workstation

Starting and Stopping Your PC Workstation

Starting and Stopping Your PC Workstation
If you are starting your PC Workstation for the first time, see "Starting
Your PC Workstation for the First Time" on the next page.

Starting Your PC Workstation

1 Before you start your PC Workstation, first switch on the display.
2 Start your PC Workstation in one of these ways:
Press the power button on the front panel.
•
Press the keyboard space bar.
•
The keyboard power-on feature will work only if Space-bar is
enabled in the Power menu of the Setup program (refer to page
92) and the system board switch 8 (KEYB power) is DOWN (the
default setting). Refer to page 90 for more information on system
board switches.
When you switch on the computer, it carries out the Power-On-Self-
Test (POST) while the PC Workstation's logo is displayed. If you
wish to view the POST details, press
Screen. If there is an error in the POST, the error will automatically
be displayed. For details, see "If a POST Error Message is
Displayed" on page 56.
3 If you have set a password in the PC Workstation's Setup program,
the password prompt displays after the POST has completed. If the
Password prompt is displayed, type your password and press
to be able to use the PC Workstation.
10
to get the HP Summary