Solving Problems Described By Lcd Status Messages - Dell PowerEdge T605 Systems Hardware Owner's Manual

Table 1-5. LCD Status Messages (continued)
Code Text
I1910 Intrusion
I1911 >3 ERRs Chk
Log
I1912 SEL Full
I1915 Video Off
(LCD lights with
a blue or amber
background.)
I1916 Video Off in
##
(LCD lights with
a blue or amber
background.)
W1228 ROMB Batt <
24hr
NOTE:
For the full name of an abbreviation or acronym used in this table, see the
"Glossary" on page 207.

Solving Problems Described by LCD Status Messages

The code and text on the LCD can often specify a very precise fault condition
that is easily corrected. For example, if the code E1418
appears, you know that a microprocessor is not installed in socket 1.
Causes
System cover has been
removed.
LCD overflow message.
A maximum of three error
messages can display
sequentially on the LCD.
The fourth message displays
as the standard overflow
message.
System Event Log is full of
events, and is unable to log
any more events.
The video has been turned
off by the RAC remote user.
The video will be turned off
in xx seconds by the RAC
remote user.
Warns predictively that the
RAID battery has less than
24 hours of charge left.
Corrective Actions
Information only.
Check the SEL for details
on the events.
Clear the log by deleting
event entries.
Information only.
Information only.
Replace RAID battery
(see "Installing a RAID
Battery" on page 116).
CPU_1_Presence
About Your System
31