Solving Problems Described By Lcd Status Messages - Dell PowerEdge 2970 Hardware Owner's Manual

Table 1-6. LCD Status Messages (continued)
Code Text
Mem Spare DIMM # The system BIOS has spared the
E2112
I1910 Intrusion
I1911 >3 ERRs Chk Log
I1912 SEL Full
I1915 Video Off
(LCD lights with a blue
or amber background.)
I1916 Video Off in ##
(LCD lights with a blue
or amber background.)
ROMB Batt < 24hr Warns predictively that the RAID
W1228
NOTE:
For the full name of an abbreviation or acronym used in this table, see the "Glossary" on page 175.

Solving Problems Described by LCD Status Messages

The code and text on the LCD can often specify a very precise fault condition that is easily corrected. For
example, if the code
E1418
in socket 1.
In contrast, you might be able to determine the problem if multiple related errors occur. For example, if
you receive a series of messages indicating multiple voltage faults, you might determine that the problem
is a failing power supply.
Causes
memory because it has
determined that the memory had
too many errors. "# & #"
represents the DIMM pair
implicated by the BIOS.
System cover has been removed.
LCD overflow message.
A maximum of three error
messages can display sequentially
on the LCD. The fourth message
displays as the standard overflow
message.
System Event Log is full of
events, and is unable to log any
more events.
The video has been turned off by
the RAC remote user.
The video will be turned off in xx
seconds by the RAC remote user.
battery has less than 24 hours of
charge left.
appears, you know that a microprocessor is not installed
CPU_1_Presence
Corrective Actions
See "Troubleshooting System
Memory" on page 124.
Information only.
Check the SEL for details on the
events.
Clear the log by deleting event
entries.
Information only.
Information only.
Replace RAID battery. See "RAID
Battery" on page 69.
About Your System
27