Dell PowerEdge T605 Systems Hardware Owner's Manual page 20

Table 1-5. LCD Status Messages (continued)
Code Text
E1211 ROMB Batt
E1214 ## PwrGd
E1216
E1217
E121A 8V PwrGd
E121D 1.2V VM Dual
PwrGd
E1227 Linear PwrGd Linear voltage regulator(s)
E1229 CPU # VCORE
E122A CPU VTT PwrGd Processor # VTT voltage has
E122D CPU # VDDIO
1.0V PwrGd
20
About Your System
Causes
RAID battery is either
missing, bad, or unable to
recharge due to thermal
issues.
Specified voltage regulator
has failed.
8V voltage regulator has
failed.
1.2V voltage regulator for
the VM dual signal has
failed.
has failed. Represents status
of multiple voltage
regulators used in the video
and LOM circuitry.
Processor # VCORE voltage
regulator has failed.
exceeded the allowable
voltage range.
Processor # VDDIO voltage
has exceeded the allowable
voltage range.
Corrective Actions
Reseat the RAID battery
connector (see "Installing
a RAID Battery" on
page 116, and
"Troubleshooting System
Cooling Problems" on
page 172).
See "Getting Help" on
page 205.
Recycle power to the
system or clear the SEL. If
the problem persists, see
"Getting Help" on
page 205.
Recycle power to the
system or clear the SEL. If
the problem persists, see
"Getting Help" on
page 205.
See "Getting Help" on
page 205.
See "Getting Help" on
page 205.
See "Getting Help" on
page 205.
See "Getting Help" on
page 205.