Troubleshooting A Diskette Drive - Dell PowerEdge T605 Systems Hardware Owner's Manual

Hide thumbs Also See for PowerEdge T605 Systems:
Table of Contents

Advertisement

3 Open the system. See "Opening the System" on page 68.
4 Remove the expansion card shroud. See "Removing the Expansion Card
Shroud" on page 72.
5 Reseat the USB key.
6 Install the expansion card shroud. See "Installing the Expansion Card
Shroud" on page 75.
7 Close the system. See "Closing the System" on page 70.
8 Reconnect the system to the electrical outlet, and turn on the system and
attached peripherals.
If the problem is not resolved, proceed to the next step.
9 Repeat step 2, step 3, and step 4.
10 Insert a different USB key that you know works properly.
11 Install the expansion card shroud. See "Installing the Expansion Card
Shroud" on page 75.
12 Close the system. See "Closing the System" on page 70.
13 Reconnect the system to the electrical outlet, and turn on the system and
attached peripherals.
If the problem is not resolved, see "Getting Help" on page 205.

Troubleshooting a Diskette Drive

Problem
Error message indicates a diskette drive problem.
Action
CAUTION:
should only perform troubleshooting and simple repairs as authorized in your
product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized by Dell is not covered
by your warranty. Read and follow the safety instructions that came with the
product.
1 Enter the System Setup program and verify that the diskette drive is
configured correctly. See "Entering the System Setup Program" on page 43.
176
Troubleshooting Your System
Many repairs may only be done by a certified service technician. You

Advertisement

Table of Contents
loading

Table of Contents