Table of Contents
Advertisement
40 Sec
Device ##
The Device## field lists the USB devices that are connected to the system.
Emulation Type [Auto]
Use the Emulation Type BIOS option to specify the type of emulation BIOS has to
provide for the USB device.
NOTE:
Please note that the device's formatted type and the emulation type
provided by the BIOS must match for a device to boot properly. If both
types do not match then device's behavior is undefined. To make sure both
types match, format the device using BIOS INT13h calls after selecting the
proper emulation option in BIOS setup. The FORMAT utility provided by
Microsoft® MS-DOS®, Microsoft® Windows® 95, and Microsoft®
Windows® 98 can be used for this purpose.
Auto
Floppy
Forced FDD
Page 126
PCISA-9652 Half-Size CPU Card
device after the start unit command.
POST waits 40 seconds for the USB mass storage
device after the start unit command.
BIOS auto-detects the current USB.
D
EFAULT
The USB device will be emulated as a floppy drive.
The device can be either A: or B: responding to
INT13h calls that return DL = 0 or DL = 1
respectively.
Allows a hard disk image to be connected as a
Advertisement
Table of Contents
