IEI Technology PCISA-9652 User Manual page 141

PCISA -9652 Half-Size CPU Card
Disabled
Enabled
Serial Port Number [COM1]
Use the Serial Port Number option allows users to select the serial port used for remote
access.
COM1 D
EFAULT
COM2
NOTE: Make sure the selected COM port is enabled through the Super I/O configuration
menu.
Base Address, IRQ [3F8h,4]
The Base Address, IRQ option cannot be configured and only shows the interrupt
address of the serial port listed above.
Serial Port Mode [115200 8,n,1]
Use the Serial Port Mode option to select baud rate through which the console redirection
is made. The following configuration options are available
115200 8,n,1 D
57600 8,n,1
D Remote access is disabled.
EFAULT
Remote access configuration options shown below
appear:
Serial Port Number
Serial Port Mode
Redirection after BIOS POST
Terminal Type
These configuration options are discussed below.
System is remotely accessed through COM1
System is remotely accessed through COM2
EFAULT
Page 121