Downloads From Base Unit (Launcher Service) - Barco ClickShare Installation Manual

6. Web Interface
Once upgraded to software version 01.07 or higher it is not possible to downgrade again below version 1.07.
Important notice for updating to software version 01.05 and above
Please note that firmware versions 01.04 and above are digitally signed to raise security level. To change from an unsigned firmware
version to signed firmware, an intermediate step is required. This step is included in firmware version 01.04. As a result, updating
firmware version 01.03 to firmware version 01.05 requires first an update from version 01.03 to 01.04, followed by an update from
01.04 to 01.05. When updating firmware version 01.04 to higher versions, no special action is required. Downgrading a firmware
version to an older version does not require an intermediate step.
Flows to follow when up or downgrading between signed and unsigned versions:
Software upgrade:
Image 6-52
Software downgrade:
Image 6-53

6.32 Downloads from Base Unit (launcher service)

About downloads
The launcher service and the ClickShare client software for PC or MAC are stored on the Base Unit and can be downloaded for
installation on the user's PC.
For more information, see "Pre-install of the Launcher service", page 36.
How to download
1. Log in to the ClickShare web interface.
2. Click the Maintenance tab (1) and then click Software (2).
84 R5900004 CLICKSHARE 23/12/2014