Web Interface; Accessing The Clickshare Web Interface - Barco ClickShare Installation Manual

6. WEB INTERFACE

Overview
•

Accessing the ClickShare Web Interface

• Language setup Web interface
• About ClickShare tabs
• Basic settings
• Wallpaper (background) selection
• Personalized wallpapers
• Display settings
• Display output settings
• On-screen text format
• Audio settings
• Integration, Polycom
• Corporate network, activation
• Corporate network, using EAP-TLS
• Corporate network, using EAP-TTLS
• Corporate network, using PEAP
• Corporate network, using WPA2-PSK
• Security: HTTPS or HTTP access protocol
• Security: Web User Interface
• Security: access SSH
• Security: Block sharing for Apps
• Advanced settings: Hostname
• Advanced settings: LAN network settings
• Advanced settings: WiFi settings
• Advanced settings: API configuration Settings
• Advanced settings: NTP setup
• Maintenance, status check ClickShare
• Maintenance, Buttons information
• Maintenance, update Buttons over WiFi
• Configured Links
• Calibrating a ClickShare Link
• Base Unit software update
• Downloads from Base Unit (launcher service)
• Manage System Configuration
• Load Default Settings
• Administrator password
• Integrator password
• Log settings
• ClickShare Help, Barco contact data
• Barco ClickShare EULA
6.1 Accessing the ClickShare Web Interface
Getting access to the Web Interface
There are three ways to access the ClickShare Web Interface:
• Via the LAN
• Direct Ethernet connection between PC and Base Unit.
• Via the Base Unit's wireless network
To access the Web Interface via the LAN
1. Open a browser.
Note: Supported browsers are Internet Explorer 8 or higher, Firefox, Google Chrome and Safari.
R5900004 CLICKSHARE 23/12/2014
6. Web Interface
41