Advanced Settings: Ntp Setup - Barco ClickShare Installation Manual

6. Web Interface
Image 6-40
Enable API

6.25 Advanced settings: NTP setup

About NTP
NTP (network time protocol) allows to synchronize clock on a network. By using NTP, the internal clock of the Base unit can be
synchronized with a NTP server on the network. This synchronization is necessary when using HTTPS and corporate network
integration.
How to setup
1. Log in to the ClickShare web interface.
2. Click the Setup tab (1) and click Advanced (2).
Image 6-41
3. To enable NTP, check the check box next to Enable (3).
4. Fill out the host name or IP address of the NTP server on your network.
5. As a backup, you can fill out the address of a second NTP server on the network.
6. Click Apply to start the synchronization.
When synchronized, the status will indicate Synchronized.
76 R5900004 CLICKSHARE 23/12/2014