Downloads From Base Unit - Barco ClickShare Installation Manual

Image 6-28
Update software
The content of the Software tab is displayed.
The current version of the Base Unit software is shown in the Base Unit Software pane.
4. To upload a new version of the Base Unit software, click Upload New Software... . (3).
A browser window opens.
5. Navigate to the new software version and click Open.
Note: This should be an ipk file. You might have to unzip the file downloaded from Barco's website.
6. Click....
Note: Updating the software to the Base Unit and installing it can take several minutes. Progress can be followed on the
meeting room display.
The Base Unit software is updated.
It is advised to pair all Buttons in the meeting room to the Base Unit after a software update has been done.
The Base Unit checks if the Button software needs to be updated and if needed, the update is executed.

6.18 Downloads from Base Unit

About downloads
The launcher service and the ClickShare client software for PC or MAC is stored on the Base Unit and can be downloaded for
installation on the different users.
For more information about these software, XXXX
How to download
1. Login to the ClickShare web interface.
2. Click the Maintenance tab (1) and then click Software (2).
R5900004 CLICKSHARE 28/02/2013
6. Web Interface
49