Integrator Password - Barco ClickShare Installation Manual

6. Web Interface
The content of the Password tab is displayed.
Image 6-58
Password
3. Enter the old password (3).
4. Enter the new password (4).
5. To confirm, enter the new password a second time (5).
6. Click Apply.
The administrator password is changed.

6.36 Integrator password

About the integrator password
When an integrator wants to access the ClickShare Base Unit via API commands a typical password can be required. This password
can be changed at any time by the administrator of the ClickShare Base Unit.
To change the integrator password
1. Log in to the ClickShare web interface.
2. Click the Maintenance tab (1) and then click Password (2)..
88 R5900004 CLICKSHARE 23/12/2014