Power Connection And Switching On - Barco ClickShare Installation Manual

4. ClickShare installation
How to connect
1. Insert a network cable with RJ-45 connector into the LAN port.
Image 4-10
LAN connection
2. Connect the other side to a LAN.

4.10 Power connection and switching on

W
ARNING
local dealer for a correct power cord.
How to connect
1. Plug the power cable in the mains power connector at the back of the Base Unit
Note: The local variant of the power cable is included in the ClickShare box.
Image 4-11
Power connection
26
:
Use a power cord which complies to local regulations. If not included in the box, contact your
R5900004 CLICKSHARE 23/12/2014