Advanced Settings: Lan Network Settings - Barco ClickShare Installation Manual

Image 6-21
Hostname
3. Click in the input field next to Hostname (3)
4. Select the current name and enter a new name.
Note: The default hostname is "ClickShare-<serial number>".

6.12 Advanced settings: LAN network settings

About LAN network settings
A network connection can be configured through DHCP or by manually entering a fixed IP address.
DHCP
Dynamic host configuration protocol. DHCP is a communications protocol that lets network administrators manage
centrally and automate the assignment of IP addresses in an organization's network. Using the Internet Protocol, each
machine that can connect to the Internet needs a unique IP address. When an organization sets up its computer users
with a connection to the Internet, an IP address must be assigned to each machine. Without DHCP, the IP address
must be entered manually at each computer and, if computers move to another location in another part of the network,
a new IP address must be entered. DHCP lets a network administrator supervise and distribute IP addresses from
a central point and automatically sends a new IP address when a computer is plugged into a different place in the
network.
DHCP setup of the LAN network
1. Log in to the ClickShare web interface.
2. Click the Setup tab (1) and click Advanced (2).
Image 6-22
DHCP setup
The Advanced tab is displayed.
3. Check the radio button next to DHCP Assigned (3).
R5900004 CLICKSHARE 19/08/2014
6. Web Interface
53