Administrator Password; Log Settings - Barco ClickShare Installation Manual

6. ClickShare Web Interface

6.18 Administrator password

About the administrator password
The administrator password to log in in the web interface can be changed at any time.
To change the administrator password
1. Log in to the ClickShare web interface.
2. Click the Maintenance tab (1) and then click Password (2)..
The content of the Password tab is displayed.
Image 6-30
Password
3. Enter the old password (3).
4. Enter the new password (4).
5. To confirm, enter the new password a second time (5).
6. Click Apply.
The administrator password is changed.

6.19 Log settings

About logging
Both Button and Base Unit log data is saved in log files on the Base Unit. These log files can contain debugging information. They
can be downloaded on a local computer and cleared on the Base Unit
How to use
1. Log in to the ClickShare web interface.
2. Click the Maintenance tab (1) and then click Logging (2)..
The content of the Logging tab is displayed.
44 R5900014 CLICKSHARE 16/09/2013