Ethernet Patch Cable With Bayonet Catch; Outdoor Wall Mount; Corner And Pole Mount; Mx-Patch-Box - Mobotix D15D Manual

37
/124
Available Accessories

1.4.4 Ethernet Patch Cable With Bayonet Catch

Order No.: MX-OPT-CBL-LAN-1/2/5/10 (length 1 m/2 m/5 m/10 m)
The MOBOTIX-developed special cable can be installed
in a waterproof manner and has an integrated sealing
gasket. Every D15D ships with a 0.5-m-long cable as
standard, which can be exchanged for a patch cable
up to 10 m in length.

1.4.5 Outdoor Wall Mount

Order No.: MX-WH-Dome
When combined with the Outdoor Wall Mount, the
D15D is fully weatherproof and its protection class
is increased from IP54 to IP65 (fully dustproof and
resistant to water jets).

1.4.6 Corner and Pole Mount

Order No.: MX-WH-Dome-ESWS
The Outdoor Wall Mount can be used for applications
mounted on a pole or the corner of a building. This
extremely robust mount is made of 3 mm powder-
coated stainless steel (white) and has been designed
specifically for outdoor use. The supplied stainless
steel straps allow the mount to be attached to poles
with diameters between 60 and 180 mm.

1.4.7 MX-Patch-Box

Order No.: MX-OPT-Patch1-EXT
Universal network connector for installation cables,
MOBOTIX patch cables and standard patch cables
(protection class IP65, –30 to +60°C/–22 to 140°F.
The MX-Patch-Box can be used to connect the patch
cable of an IP device with the network installation
cable (for example, Cat 5) or network patch cable
(RJ45 connector) in a weatherproof manner and fits
into the 90 x 90 mm space of the Outdoor Wall Mount
(see diagram).
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • sales@mobotix.com