Table of Contents
Advertisement
Configuring the Camera
4.2.4.5 Gain
Purpose:
To set the gain (ADCref) or to read the current gain (ADCref) setting. See Section
more information on gain.
Type:
This is a read or write command.
Read Command:
Response:
Write Command:
Response:
Data Format:
Data Range:
4.2.4.6 Negative Offset
Purpose:
To set the negative offset or to read the current negative offset setting. If you use OfsNeg,
set OfsPos to 0. See Section
Type:
This is a read or write command.
Read Command:
Response:
Write Command:
Response:
Data Format:
Data Range:
4-14
PRELIMINARY
Cmd-ID
R/W-Flag
0x80
1
Cmd-ID
R/W-Flag
0x80
0
Cmd-ID
R/W-Flag
0x80
0
None
Byte 1
Gain setting
The gain setting can range from 0x00 to 0xFF. See the restrictions described
in section 3.7.
3.7
for more information on offset.
Cmd-ID
R/W-Flag
0x84
1
Cmd-ID
R/W-Flag
0x84
0
Cmd-ID
R/W-Flag
0x84
0
None
Byte 1
Negative offset setting
The negative offset setting can range from 0x00 to 0xFF
Data Length
Data
1
Data Length
Data
1
1 Byte
Data Length
Data
1
1 Byte
Data Length
Data
1
Data Length
Data
1
1 Byte
Data Length
Data
1
1 Byte
3.7
for
-
-
k
Basler A500
Advertisement
Table of Contents
Troubleshooting
