Exsync, Edge-Controlled Mode With Synchronous Timing 2 - Basler A500k User Manual

3.3.1.3 ExSync, Edge-controlled Mode with Synchronous Timing 2

Figure 3-10: ExSync, Edge-controlled Mode - Exposure Start and Stop with Frame Valid High
If the exposure starts and ends while Frame Valid is high (see Table for values n to y):
• The actual start of exposure can be x µs later than the rise of the ExSync signal.
• Actual length of exposure time = n µs - y µs
n
x
y
k
Basler A500
PRELIMINARY
k/kc k/kc
A504 A501
exposure set by ExSync
5 µs ... 6 µs 20 ... 26.9 µs
3 µs 12.8 µs
Basic Operation and Features
3-11