3.3.2.4 ExSync, Level-controlled Mode with Synchronous Timing 2
Figure 3-14: ExSync, Level-controlled Mode - Exposure Start and Stop when Frame Valid High
If the exposure starts and ends while Frame Valid is high (see Table for values n to z):
• The actual start of exposure can be x µs later than the falling of the ExSync signal.
• Actual length of exposure time = n - y µs ... n + z µs
The actual length of exposure time can only occur in multiples of w µs.
n
x
y
z
w
k
Basler A500
PRELIMINARY
k/kc
k/kc
A504
A501
exposure set by ExSync
1.8 µs to 5 µs
1 µs to 3 µs
≤
≤
2 µs
7 µs
≤
≤
2 µs
12.7 µs
2 µs
13.2 µs
Basic Operation and Features
3-15