Timer 1; Timer 2 - Basler A500k User Manual

Configuring the Camera

4.2.4.2 Timer 1

Purpose: To set Timer 1 or to read the current Timer 1 setting. Timer 1 is used when the camera is
operating in ExSync programmable mode or in free-run mode. See Section
Type: This is a read or write command.
Read Command:
Response:
Write Command:
Response:
Data Format:
Data Range:

4.2.4.3 Timer 2

Purpose: To set Timer 2 or read the current Timer 2 setting. Timer 2 is used when the camera is
operating in free-run mode. See Section
Type: This is a read or write command.
Read Command:
Response:
Write Command:
Response:
Data Format:
Data Range:
4-12
PRELIMINARY
Cmd-ID R/W-Flag
0xA6 1
Cmd-ID R/W-Flag
0xA6 0
Cmd-ID R/W-Flag
0xA6 0
None
Byte 1 Low byte of the Timer 1 setting
Byte 2 Mid byte of the Timer 1 setting
Byte 3 High byte of the Timer 1 setting
The timer 1 setting can range from 0x00000A to 0xFFFFFF µs. The
recommended maximum value is 0x0080E8 (33ms).
Cmd-ID R/W-Flag
0xA7 1
Cmd-ID R/W-Flag
0xA7 0
Cmd-ID R/W-Flag
0xA7 0
None
Byte 1 Low byte of the Timer 2 setting
Byte 2 Mid byte of the Timer 2 setting
Byte 3 High byte of the Timer 2 setting
The timer 2 setting can range from 0x000003 to 0xFFFFFF µs.
Data Length
3
Data Length
3
Data Length
3
3.2 for details.
Data Length
3
Data Length
3
Data Length
3
3.2 for details.
Data
-
Data
3 Bytes
Data
3 Bytes
Data
-
Data
3 Bytes
Data
3 Bytes
k
Basler A500