Starting Engine - Volvo EC330B Operator's Manual

Operating instructions
96

Starting engine

Starting engine
See Safety locking system on page 60.
rpm
After checking for personnel and obstructions around the
machine, start the engine and sound the horn.
Do not operate the operating levers and switches when
A
starting.
IMPORTANT
S80510A
Do not hold the key at the STARTING (
than 20 seconds, as this could seriously damage the starting
system. After 2 minutes try to start the engine again.
If abnormal sounds, excessive vibration, or abnormal opera-
tion occurs, turn the key to STOP (
gine immediately.
NOTE : Make sure the safety bar is in the downward (lock-out)
position, otherwise the engine cannot be started.
At temperature above 0°C (+32°F)
1 Turn engine speed selection switch (A) to the low speed posi-
tion. See Engine speed control switch on page 37.
2 Turn the key to the starting position (
page 94.
3 Release the key when the engine has started.
If the engine dose not start:
4 Wait until the engine has stopped completely.
S82121
5 Turn the key back to the stop position (
ing attempt is made.
At temperature below 0°C (+32°F)
1 Turn engine speed selection switch (A) to the low speed posi-
tion. See Engine speed control switch on page 37.
2 Turn the key to the running (preheating) position (
Start switch on page 94.
3 After preheating indicator is OFF, turn the key to the starting
position (
4 Release the key when he engine has started.
S82122
If the engine dose not start:
5 Wait until the engine has stopped completely.
6 Turn the key back to the stop position (
ing attempt is made.
WARNING!
)
) position for more
) position to stop the en-
). See Start switch on
) before a new start-
). See
) before a new start-