Safety when servicing
120
Service position
Service position
WARNING!
If you have to work on a machine before it has cooled
down, beware of hot fluids and components which can
cause burns.
Before you begin any service work, the machine should be
placed on level ground and prepared for service as shown below:
3
1
2
1 Position the machine on even, firm and level ground.
2 Attachment resting on the ground.
3 Engine turned off and the ignition key removed.
4 Move the safety locking lever down to lock the system se-
curely, See Safety locking system on page 60.
5 Pressurized lines and vessels should have the pressure re-
leased gradually to avoid risks.
6 Allow the machine to cool *.
* If you have to work on a machine before it has cooled down, be-
ware of hot fluids and components which can cause burns.
4
5
6
S82192