Operating instructions
Escaping from swampy ground
109
Escaping from swampy ground
Be very careful when working on swampy ground.
In case that one track gets bogged
If one track gets bogged down, raise this track using the bucket
and put a plank under the track.
IMPORTANT
When raising the machine using boom or arm, use the bottom
of the bucket. (Do not use the bucket teeth.)
Set the angle between boom and arm at 90 ° ~ 110 °.
S82162
After working in water or escaping from swampy ground, re-
plenish the grease to the attachment pins. Check the idler,
rollers and track drive case oil, if contaminated, change the
oil.
In case both tracks get bogged
In case that both tracks get bogged down put planks under each
track. Thrust the bucket into the ground, pull with the arm as when
digging, and move the travel lever forward to escape.
S82161