Permissible Depth Of Water - Volvo EC330B Operator's Manual

Operating instructions
76 Safety and responsibility
1
Never operate close to a high tension
power line
You can receive an electric shock if the machine approaches close
to a high tension power line. Physical contact is not necessary to
draw current from the power line!
If working near a high tension power line, prohibit everyone from
approaching the machine.
S82201
Contact the electricity supply company prior to working near over-
head power lines.
For safety reasons, maintain the following minimum distance be-
tween the machine and the power line.
Voltage
0 ~ 1 KV
1 ~ 55 KV
55 ~ 500 KV
If the attachment comes into contact with the power line, stay in the
cab, and if the machine remains functional, try to break the circuit
by moving the attachment away from the power line.

Permissible depth of water

WARNING!
S82140
When traveling out of water, If the rear of the upper body is
under water, the engine fan may be damaged. Be careful in
this situation.
Permissible working depth in water is the center of upper rollers.
Do not fully submerge the upper rollers.
Upon leaving the water, make sure all the grease is replenished in
the areas affected by the water, e.g. bucket pin etc., remove the
old grease completely regardless of the maintenance period. Also
2
check the oil in the travel drive for contamination, and if necessary,
replace it.
S82141
1 Upper roller
2 Water level
Mininum distance to power line
2 m (7 ft)
4 m (13 ft)
6 m (20 ft)