Ce Marking And Declaration Of Conformity; Eu Emc Directive - Volvo EC330B Operator's Manual

Volvo Construction Equipment
Volvo Construction Equipment Korea Ltd.
1, Guehyun-Dong, Changwon-City, Kyungnam, Korea 641-430
Model/Type
Product
Identification
Number
Machine mass Kg
Engine net power KW
Manufacturing year

CE marking and Declaration of Conformity

NOTE :
Applies only to machines marketed within the EU/ EEA.
This machine is CE marked. This means that, when delivered to
the customer, the machine meets the applicable "Essential Health
and Safety Requirements", according to the EU Machine Safety
Directive. Any person carrying out an alteration that affects the
safety of the machine, is responsible for the consequences.
The machine is supplied together with a Declaration of Conformity
with the EU Machine Safety Directive. The documentation is a
valuable document, which should be kept safe and always be kept
14880000
in the machine.
If the machine is used for purposes, or with other special bodies or
add-ons,other than described in these instructions, safety must at
all times and in each case be maintained. The person carrying out
such action is also responsible for the action, which, in some cas-
es, may require a new CE marking and the issue of a new Decla-
ration of Conformity in compliance with the EU Machine Safety
Directive.
Volvo Construction Equipment is only responsible for a ma-
chine which is used with approved equipment and spare parts
specified by Volvo Construction Equipment.
S82280

EU EMC Directive

The electronic equipment of the machine may in some cases
cause interference to other electronic equipment, or suffer from ex-
ternal electromagnetic interference, which may constitute safety
risks.
The EU EMC directive on "Electromagnetic compatibility", 89 / 336
/ EEC, provides general description of what demands can be
made on the machine out of a safety point of view, where permitted
limits have been determined and given according to international
standards.
A machine or device which meets the requirements should be CE
marked. Our machines have been tested particularly for electro-
magnetic interference. The CE marking of the machine and the
declaration of conformity also cover the EMC directive.
If other electronic equipment is fitted to this machine, the equip-
ment must be CE marked and tested on the machine with regard
to electromagnetic interference.
Presentation
General 9