Working Lights Switch; Power Maximum Mode Selector Switch - Volvo EC330B Operator's Manual

Instruments and controls
38 Description of instrument panel
0
1
2
0
1
0
1
0
1

2 Working lights switch

Position 0 Lights OFF
Position 1 Instrument panel lamp and boom working lights ON.
Position 2 Instrument panel lamp, boom working lights and deck work-
S82287

3 Power maximum mode selector switch

Position 0 Power maximum mode DEACTIVATED
Position 1 Power maximum mode ACTIVATED
At 9 step of the engine speed control switch,
S82052A Position 0 H mode
Position 1 P mode
If the machine is not operated in the P mode for 5 seconds or
more, the engine speed automatically goes down to idling if the
Auto idle selector switch is activated (in position 1). if the machine
is operated again, it is returned to P mode.
At the P mode, it become H mode if 9 step is selected after turning
the engine speed control switch to another step.
4 Auto idle select switch
When this switch is turned to auto idling position (1), if the operat-
ing levers, the travel levers (pedals), and the engine speed selec-
tion switch are not operated for 5 seconds or more, the engine
speed will be lowered automatically to reduce fuel consumption. If
S82288
any one of the above is operated, the engine speed returns to the
setting speed of the engine speed control switch.
Position 0 Auto idling DEACTIVATED
Position 1 Auto idling ACTIVATED
5 Travel speed select switch
WARNING!
S82289
Make sure to stop the machine, before changing the travel
mode.
Travel in low speed, on a slope, soft ground or confined
place.
Use low speed fixed when loading the machine onto a
trailer.
Position 0 Travel at LOW speed only
Position 1 Travel at LOW and HIGH automatic shift in accordance with
the travel condition,
ing lights ON.