S82003E
Disassembling for transportation
Lifting machine
WARNING!
Do not lift the machine with a person in the cab or on the
machine.
Use certified cables, slings, shackles and hooks of
adequate load rating.
Always lift the machine as shown below. Improper rigging
can allow the load to shift and cause injury or damage.
EC330B
-40~60
-1.6~2.4
Lift the machine on flat, firm and level ground.
1 start the engine, and set the attachment as illustrated. Position
the upper structure boom forward over the idlers.
2 Move the safety locking lever down to lock the system se-
curely, See Safety locking system on page 60.
3 Stop the engine, check the safety around the machine, then
close and lock the front window cab door, and engine hood se-
curely.
4 As shown in the illustration, connect lifting cables or slings with
sufficient strength for the machine weight at the lifting points
correctly.
5 After installation of all hoisting equipment, lift the machine a lit-
tle to check its balance, if satisfactory, lift it slowly and evenly.
Operating instructions
1050
14
45.9
41.3
83
8.5
27.9