Boost/Hammer/Shear Selector Switch - Volvo EC330B Operator's Manual

1
0
2
A
C
E
D
B
Description of instrument panel
6 Boost / hammer / shear selector switch
See 2 Operating lever (right) on page 54.
If X1 (hammer / shear) is not equipped
Position 0 Boost mode
If button (C) on the right operating lever is pressed, digging
S82290A
power is increased for 9 seconds.
Position 1 Hammer mode
In this mode, boost doesn't function.
Position 2 Shear mode
If button (C) is pressed, digging power is increased for 9
seconds.
If X1 (hammer / shear) is fitted
If X1 (hammer / shear) pedal control is fitted
Button (E) is Horn in all position (position 0, 1 & 2)
Button (D) is Spare in all position (position 0, 1 & 2)
Position 0 Boost mode
If button (C) is pressed, digging power is increased for 9
seconds.
In this mode, X1 (hammer / shear) doesn't function.
Position 1 Hammer mode
If pedal forward (A) is pressed, the X1 will work. (Low pres-
sure)
If pedal backward (B) is pressed, the X1 will not work.
If button (C) is pressed, the X1 will not work.
S82053D
In this mode, boost doesn't function.
Position 2 Shear mode
If pedal forward (A) or backward (B) is pressed, the X1 will
work. (High pressure)
If button (C) is pressed, digging power is increased for 9
seconds.
If X1 (hammer / shear) 1-switch control is fitted
Button (E) is Horn in all position (position 0, 1 & 2)
Button (D) is Spare in all position (position 0, 1 & 2)
Position 0 Boost mode
If the button (C) is pressed, digging power is increased for
9 seconds.
In this mode, X1 (hammer / shear) doesn't function.
Position 1 Hammer mode
If button (C) is pressed, the X1 will work. (Low pressure)
In this mode, boost doesn't function.
Position 2 Shear mode
If button (C) is pressed, digging power is increased for 9
seconds.
In this mode, X1 (hammer / shear) doesn't function.
If X1 (hammer / shear) 2-switch control is equipped
Position 0 Boost mode
If button (E) is pressed, digging power is increased for 9
seconds.
In this mode, X1 (hammer / shear) doesn't function.
Position 1 Hammer mode
If the button (C) is pressed, the X1 will work. (Low pressure)
If the button (D) is pressed, the X1 will not work.
In this mode, boost doesn't function.
Position 2 Shear mode
If button (C or D) is pressed, the X1 will work. (High pres-
sure)
If button (E) is pressed, digging power is increased for 9
seconds.
Instruments and controls
39