Operating instructions
94
Start switch
S82301
S82302
S82303
Start switch
The start switch (A) has three position.
A
S82108A
Stop position
The engine stops immediately.
Running (preheating) position
When the switch is in this position:
– The electronics is started up
– The electronics is up and running
– The preheating will be connected.
IMPORTANT
Do not repeat to turn on and off the ignition key under engine
cooled (below 20 °C).
A
The preheating function still remains if you repeat to turn on
H
and off the ignition key when the engine is under 20 °C,
which may damage and fire cable.
Preheat the machine fully (by when the pointer of cooling
C
gauge on the instrument is within the range of 'A') to repeat
to turn on and off the ignition key for service or other pur-
S82339A
pose.
Starting position
When the switch is in this position
– The starter motor will be engaged.
See Safety locking system on page 60.