Line Preview - Siemens OpenScape 35G User Manual

Step by step

Line preview

Prerequisite: You are already on a call on one line and a
further call rings on a secondary line. You have pro-
grammed a key with the "Preview" function  page 65.
Preview for a call
Prerequisite: Your administrator has deactivated the
permanent preview function.
S
Press the "Preview" key. The key illuminates. The pre-
view function is temporarily activated.
T
Press the flashing line key. A popup window opens and
you receive information about the caller. Press the line
key again to accept the call or wait until the popup clos-
es itself after a specified period of time.
The preview function is switched off and has to be
switched on again for a further operation.
Permanent preview
Prerequisite: Your administrator has activated the per-
manent preview function.
S
Press the "Preview" key. This way the preview for all
lines with "preview mode" remains active until you
press the "Preview" key again.
If the line preview has been deactivated, a call is
answered immediately on a line when the line
key is pressed, without first showing caller infor-
mation.
Making calls with multiple lines
117