Enhanced Phone Functions; Incoming Calls; Deflecting A Call - Siemens OpenScape 35G User Manual

Enhanced phone functions

Step by step
Deflect
?
089008844
User
Configuration

Incoming calls

Deflect?
Allow deflection = No
74
Enhanced phone functions
Incoming calls

Deflecting a call

Using call deflection
Prerequisite: An incoming call is displayed or signaled.
"Deflect" must be allowed.
m
Select and confirm the option shown.
l
If a destination phone number is stored ( page 74),
you can select and confirm it. The call is deflected.
or If you did not set a phone number when programming
call deflection, you are now prompted to enter a desti-
nation phone number for call deflection.
j
Enter and confirm the destination phone number. The
call is deflected.
Permitting call deflection
z You can also configure this setting via the Web interface
 page 190. "Deflect" must be authorized by adminis-
trator.
Settings Press the key shown.
Select and confirm the option shown.
j
if nec. Enter and confirm the user password.
Select and confirm the option shown.
Select and confirm the option shown.
Select and confirm the option shown.
f
Select and confirm the option shown.