Programming A Key; Access The Programming Mode; Select Key To Be Programmed - Siemens OpenScape 35G User Manual

Programmable keys
Step by step
User
Phone
Program keys
Normal
Shifted
Do not disturb
Save & Exit
66

Programming a key

z You can also configure this setting via the Web interface
 page 190.

Access the programming mode

Settings Press the key shown.
Select and confirm the option shown.
j
if nec. Enter and confirm the User password.
Select and confirm the option shown.
Select and confirm the option shown. You are prompted
to press the key you wish to program.

Select key to be programmed

S
Press the key you want to program until the input field
opens. The key illuminates continuously.
Select and confirm the option shown to program the
first level.
or
Select and confirm the option shown to program the
second level.
Select and confirm the required function in the list (e. g.
Do not disturb).
Select and confirm the option shown.