GeoVision GV-IP Speed Dome Quick Start Manual page 67

3.14 Restoring to Default Settin
You can restore the camera to factory default settings using the Web
interface or directly on the camera. On the Web interface, you can choose
to do a full restoration or partial restoration of default settings.
Using the Web Interface
1. Click the System t
2. To restore all settings to factory default, click the Full Restore button.
The system will restart in 30 seconds. Note that the IP address will be
restored to default.
3. To restore all settings to factory default except for the network and the
PTZ settings, click the Partial Restore button. The system will restart
in 30 seconds.
62
ab and selec Factory Default f t
gs
rom the left menu.